Their cost is about the same as the older "dimmability" circuitry that they replace in LED bulbs, fixtures or drivers.Ī residential-type dimmer switch with sliding knob to change brightness. They enable computer control via networked switches, but do not require it. A simple communications protocol, such as Blink'n'Dim, delivers dimming commands via the power line.
Dimmable light software#
Most recently, software programmable internal dimmers can use signals from the same switch that turns lights on and off to control dimming. Since semiconductor or solid-state dimmers switch quickly between a low resistance "on" state and a high resistance "off" state, they dissipate very little power compared with the controlled load. A variable resistor would dissipate power as heat and acts as a voltage divider. Modern dimmers are built from semiconductors instead of variable resistors, because they have higher efficiency.
Dimmable light manual#
Dimmers with direct manual control had a limit on the speed they could be varied at but this problem has been largely eliminated with modern digital units (although very fast changes in brightness may still be avoided for other reasons like lamp life). In the professional lighting industry, changes in intensity are called "fades" and can be "fade up" or "fade down". In newer systems, these protocols are often used in conjunction with Ethernet. Modern professional dimmers are generally controlled by a digital control system like DMX or DALI. Small domestic dimmers are generally directly controlled, although remote control systems (such as X10) are available. More specialized equipment is needed to dim fluorescent, mercury-vapor, solid-state, and other arc lighting.ĭimmers range in size from small units the size of domestic light switches to high-power units used in large theatrical or architectural lighting installations. Although variable-voltage devices are used for various purposes, the term dimmer is generally reserved for those intended to control light output from resistive incandescent, halogen, and (more recently) compact fluorescent lamps (CFLs) and light-emitting diodes ( LEDs). By changing the voltage waveform applied to the lamp, it is possible to lower the intensity of the light output. JSTOR ( December 2019) ( Learn how and when to remove this template message)Ī common dual dimmer module used in stage lighting A dimmerĪ dimmer is a device connected to a light fixture and used to lower the brightness of the light.Unsourced material may be challenged and removed. Please help improve this article by adding citations to reliable sources. This article needs additional citations for verification.
0 kommentar(er)
